Newflex® Spiral Reinforced
PVC Suction Hose
Features
- 100% PVC construction
- Spiral reinforcement made from rigid PVC to resist impact, crushing, and kinking
- Lighter than ply-wrapped rubber and other similar hoses
- Available in Food and Industrial Grades
- Food Grade made from non-toxic ingredients conforming to FDA and 3-A standards
- Smooth interior produces low friction loss permitting maximum flow
Applications
Agricultural Uses • Fluid & Chemical Transfer • Food & Syrup Handling • General Water Suction & Discharge • Hopper Feeder Lines for Resin • Irrigation Lines • Mining Pumps • Pneumatic Conveyance of Granular Materials • Slurry Handling • Vacuum Lines
Recommended
Fittings & Clamps
Physical Properties**
Hardness, Shore A ±5
Tensile Strength, psi
Elongation at Break, %
Brittle Temperature, °F
Max. Operating Temperature, °F
65
1900
440
-45
150
70
2000
420
-42
140
Notes
NEWFLEX reinforced suction hose is widely used throughout the industry in both positive and negative pressure applications. Its advanced design allows the use of light-weight, corrosion-resistant PVC to replace bulkier and heavier ply-wrapped rubber hose.
NEWFLEX series ‘FH’ and ‘FHS’ are clear, allowing the user to have full visual flow of material. The Food Grade lines are made from FDA-approved ingredients suitable for food and beverage handling. The smooth interior is easily sterilized and cleaned. Both types have a vacuum rating of 28 in.Hg.
NEWFLEX series ‘VFH’ is produced from a clear FDA liner with an industrial grade white helix, which is not exposed to the hose I.D. It can handle light-duty pressure discharge, gravity feed, and moderate vacuum applications.
Any information presented on this webpage or in related promotional materials is being presented solely for informational purposes and does not create any representation from NewAge to any buyer regarding a product’s fitness for a particular use or that a particular use of the product by a buyer (including incorporation into a medical device) would comply with all applicable laws and regulations. NewAge’s standard terms and conditions (found here) will be the sole and exclusive legal agreement between the parties with regards to any purchased products.
Specifications
NEWFLEX FH – FOOD GRADE – STANDARD DUTY – CLEAR, CONVOLUTED O.D.
| Part Number | Note | ID (in.) | OD (in.) | Wall (in.) | Working PSI (at 70°F) | Vacuum Rating (in.Hg) | Bend Radius (in.) | Weight (lbs./100 ft.) |
|---|---|---|---|---|---|---|---|---|
| 1200101 | (B) | 1.000 | 1.25 | .125 (1/8) | 60 | 28 | 2 | 19 |
| 1200178 | * | 1.250 (1-1/4) | 1.625 (1-5/8) | .188 (3/16) | 50 | 28 | 3 | 29 |
| 1200255 | * | 1.500 (1-1/2) | 1.813 (1-13/16) | .157 | 50 | 28 | 3 | 34 |
| 1200332 | * | 1.750 (1-3/4) | 2.094 (2-3/32) | .172 | 45 | 28 | 4 | 40 |
| 1200409 | (B) | 2.000 | 2.375 (2-3/8) | .188 (3/16) | 45 | 28 | 4 | 50 |
| 1200486 | * | 2.250 (2-1/4) | 2.625 (2-5/8) | .188 (3/16) | 40 | 28 | 5 | 55 |
| 1200563 | * | 2.500 (2-1/2) | 2.938 (2-15/16) | .219 (7/32) | 40 | 28 | 6 | 77 |
| 1200640 | * | 3.000 | 3.438 (3-7/16) | .219 (7/32) | 35 | 28 | 8 | 102 |
| 1200717 | * | 4.000 | 4.563 (4-9/16) | .282 | 35 | 28 | 10 | 164 |
(B) Limited stock item; lead times and minimums may apply
* Non-stock item; lead times and minimums may apply
Standard coil length is 100 ft. Add length suffix to part number when ordering. Example: 100 ft. of 1-1/4″ I.D. x 1-5/8″ O.D. hose is part number 120 0178-100. Working pressures are calculated from burst testing using a 3:1 safety factor. Application testing is recommended.
ID is the critical dimension for fittings application.
NEWFLEX FHS – FOOD GRADE – HEAVY DUTY – CLEAR*, SMOOTH O.D.
| Part Number | Note | ID (in.) | OD (in.) | Wall (in.) | Working PSI (at 70°F) | Vacuum Rating (in.Hg) | Bend Radius (in.) | Weight (lbs./100 ft.) |
|---|---|---|---|---|---|---|---|---|
| 1210181 | * | .750 (3/4) | .938 (15/16) | .094 (3/32) | 105 | 28 | 3 | 20 |
| 1210258 | * | 1.000 | 1.250 (1-1/4) | .125 (1/8) | 100 | 28 | 3 | 27 |
| 1210335 | (B) | 1.250 (1-1/4) | 1.500 (1-1/2) | .125 (1/8) | 95 | 28 | 3 | 30 |
| 1210412 | * | 1.500 (1-1/2) | 1.813 (1-13/16) | .157 | 85 | 28 | 4 | 40 |
| 1210489 | * | 2.000 | 2.375 (2-3/8) | .188 (3/16) | 80 | 28 | 5 | 60 |
| 1210566 | * | 2.500 (2-1/2) | 2.875 (2-7/8) | .188 (3/16) | 75 | 28 | 7 | 85 |
| 1210643 | * | 3.000 | 3.438 (3-7/16) | .219 (7/32) | 65 | 28 | 8 | 115 |
| 1210797 | * | 4.000 | 4.500 (4-1/2) | .250 (1/4) | 50 | 28 | 10 | 175 |
(B) Limited stock item; lead times and minimums may apply
* Non-stock item; lead times and minimums may apply
*Food Grade is all Clear; Industrial Grade has a White Helix.
Standard coil length is 100 ft. Add length suffix to part number when ordering. Example: 100 ft. of 3/4″ I.D. x 15/16″ O.D. Food Grade hose is part number 121 0181-100. Working pressures are calculated from burst testing using a 3:1 safety factor. Application testing is recommended.
ID is the critical dimension for fittings application.
NEWFLEX FHS – INDUSTRIAL GRADE – HEAVY DUTY – CLEAR WITH WHITE HELIX*, SMOOTH O.D.
| Part Number | Note | ID (in.) | OD (in.) | Wall (in.) | Working PSI (at 70°F) | Vacuum Rating (in.Hg) | Bend Radius (in.) | Weight (lbs./100 ft.) |
|---|---|---|---|---|---|---|---|---|
| 1230180 | .750 (3/4) | .938 (15/16) | .094 (3/32) | 105 | 28 | 3 | 20 | |
| 1230257 | 1.000 | 1.250 (1-1/4) | .125 (1/8) | 100 | 28 | 3 | 27 | |
| 1230334 | 1.250 (1-1/4) | 1.500 (1-1/2) | .125 (1/8) | 95 | 28 | 3 | 30 | |
| 1230411 | [B] | 1.500 (1-1/2) | 1.813 (1-13/16) | .157 | 85 | 28 | 4 | 40 |
| 1230488 | [B] | 2.000 | 2.375 (2-3/8) | .188 (3/16) | 80 | 28 | 5 | 60 |
| 1230565 | [B] | 2.500 (2-1/2) | 2.875 (2-7/8) | .188 (3/16) | 75 | 28 | 7 | 85 |
| 1230642 | [B] | 3.000 | 3.438 (3-7/16) | .219 (7/32) | 65 | 28 | 8 | 115 |
| 1230796 | [B] | 4.000 | 4.500 (4-1/2) | .250 (1/4) | 50 | 28 | 10 | 175 |
(B) Limited stock item; lead times and minimums may apply
* Non-stock item; lead times and minimums may apply
*Food Grade is all Clear; Industrial Grade has a White Helix.
Standard coil length is 100 ft. Add length suffix to part number when ordering. Example: 100 ft. of 3/4″ I.D. x 15/16″ O.D. Food Grade hose is part number 121 0181-100. Working pressures are calculated from burst testing using a 3:1 safety factor. Application testing is recommended.
ID is the critical dimension for fittings application.
NEWFLEX VFH – FOOD GRADE LINER – LIGHT DUTY – CLEAR WITH WHITE HELIX, CONVOLUTED O.D.
| Part Number | Note | ID (in.) | OD (in.) | Wall (in.) | Vacuum Rating (in.Hg) | Bend Radius (in.) | Weight (lbs./100 ft.) |
|---|---|---|---|---|---|---|---|
| 1240176 | .375 (3/8) | .570 | .098 | 24 | 0.5 | 5 | |
| 1240253 | .500 (1/2) | .700 | .100 | 24 | 0.5 | 6 | |
| 1240330 | .625 (5/8) | .830 | .103 | 24 | 0.625 | 8 | |
| 1240407 | .750 (3/4) | .965 | .108 | 24 | 0.75 | 10 | |
| 1240484 | [B] | 1.000 | 1.250 (1-1/4) | .125 (1/8) | 24 | 1 | 14 |
| 1240561 | 1.250 (1-1/4) | 1.500 (1-1/2) | .125 (1/8) | 22 | 1 | 15 | |
| 1240638 | [B] | 1.500 (1-1/2) | 1.813 (1-13/16) | .157 | 20 | 2 | 20 |
| 1240715 | [B] | 2.000 | 2.375 (2-3/8) | .188 (3/16) | 18 | 2 | 34 |
(B) Limited stock item; lead times and minimums may apply
* Non-stock item; lead times and minimums may apply
This series has no positive pressure ratings. Increasing pressure will cause the hose to elongate and expand. If pressure is a concern, in-plant testing is advised. Standard coil length is 100 ft. Add length suffix to part number when ordering. Example: 100 ft. of 3/8″ I.D. x .570″ O.D. hose is part number 124 0176-100.
ID is the critical dimension for fittings application.
Custom Capabilities
Size
Color
All custom products are subject to minimum order quantities and lead times. For other custom options, please contact us.
