Vardex® Steel Wire
Reinforced PVC Hose
Features
- Spiral steel wire reinforcement incorporated within the wall of flexible PVC tubing
- Made from non-toxic ingredients conforming to FDA standards
- Kink and crush resistant
- Handles pressure and full vacuum (29.9 in.Hg.) applications
- Glass-like clarity with mirror-smooth surfaces provide outstanding visual flow characteristics
- Lightweight (compared to rubber hose) yet tough and abrasion resistant
- REACH compliant
Applications
Chemical Transfer • Conduit • Coolant Lines • Environmental Suit Air Feed • Floor Cleaning Equipment • Food & Beverage Lines • Material Handling • Shop Air Supply • Spray Systems • Vacuum Lines • Water Feeds
Recommended
Fittings & Clamps
Physical Properties**
Hardness, Shore A ±5
Tensile Strength, psi
Elongation at Break, %
Brittle Temperature
Max. Operating Temperature
73
2100
270
23°F
150°F
Notes
VARDEX, with its’ steel wire reinforcement coil, is specifically suited for applications where resistance to kinking is of primary importance. A proprietary construction technique employed during the manufacture of VARDEX permits full vacuum capabilities (29.9 in.Hg.) for all sizes without hose collapse.
Constructed of clear, corrosion-resistant PVC, VARDEX can be used to transport various chemicals in areas with tight turns and sharp bends. Its bend radius is approximately four times the I.D.
For easy identification, VARDEX is imprinted with the trademarked name.
Any information presented on this webpage or in related promotional materials is being presented solely for informational purposes and does not create any representation from NewAge to any buyer regarding a product’s fitness for a particular use or that a particular use of the product by a buyer (including incorporation into a medical device) would comply with all applicable laws and regulations. NewAge’s standard terms and conditions (found here) will be the sole and exclusive legal agreement between the parties with regards to any purchased products.
Specifications
Part Number | ID (in.) | OD (in.) | Wall (in.) | Working PSI (at 70°F) | Bend Radius (in.) | Weight (lbs./100 ft.) |
---|---|---|---|---|---|---|
1400070 | .250 (1/4) | .453 | .102 | 200 | 1 | 7 |
1400112 | .375 (3/8) | .610 | .118 | 175 | 1.5 | 11.5 |
1400154 | .500 (1/2) | .748 | .124 | 140 | 2 | 15 |
1400196 | .625 (5/8) | .906 (29/32) | .141 | 100 | 2.5 | 19.8 |
1400238 | .750 (3/4) | 1.024 | .137 | 100 | 3 | 24 |
1400280 | 1.000 | 1.319 | .160 | 85 | 4 | 37.6 |
1400322 | 1.250 (1-1/4) | 1.634 | .192 | 85 | 4.5 | 49 |
1400364 | 1.500 (1-1/2) | 1.909 | .205 | 85 | 6 | 67.2 |
1400406 | 2.000 | 2.382 | .191 | 70 | 8 | 85 |
Standard coil length is 100 ft. Add length suffix to part number when ordering.
Example: 100 ft. of 2″ I.D. x 2.382″ O.D. hose is part number 140 0406-100.
Working pressures are calculated from burst testing using a 3:1 safety factor. Application testing is recommended.
ID is the critical dimension for fittings application.