NewAge LogoFluid Flow Specialists

SUB MENU


VITUBE®   Back to Tubing & Hose Page
viton tubing

Made in USA

   Flexible Tubing of Viton®
 
  • Made of 100% pure Viton, a high performance synthetic rubber
  • Excellent temperature resistance: -40F (-30°F for Type A) to 400F continuously; 600F periodically
  • Offers the widest range of fluid and chemical resistance of any commercial rubber
  • Excellent resistance to oils, fuels, lubricants, and most mineral acids
  • Also resistant to many aliphatic and aromatic hydrocarbons such as carbon tetrachloride, benzene, toluene, and xylene
  • Excellent resistance to environmental exposure such as sunlight and ozone
  • Available in 75 and 60 Shore A durometers (Type A and Type B)
APPLICATIONS

Appliances • Automotive Fluids • Cable Jacketing • Chemical Lines • Fuel & Oil Lines • Hot Lubrication • Model Engine Exhaust • Peristaltic Pumps • Seals & 'O'-Rings • Solvents

Physical Properties** Type A Type B
Hardness, Shore A 75 60
Tensile Strength, psi 1600 1450
Elongation at Break, % 150 350
Brittle Temperature -30F -40F
Max.Operating Temperature 400F 400F

**Values listed are typical and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for the application.

Tolerances
0" - .100"   .010
.101" - .160"   .013
.161" - .250"   .016
.251" - .400"   .020
.401" - .630"   .025
.631" - 1.000"   .032

Recommended Fittings & Clamps
  Notes

VITUBE’s main attributes include exceptional chemical resistance at elevated temperatures. It has withstood continuous service temperatures of 600F for 48 hours and 500F for 1000 hours while maintaining its mechanical properties. Care should be taken, however, at these elevated temperatures. Tests should be performed to determine application suitability.

VITUBE possesses the high resiliency of an elastomer as well as the good mechanical properties of conventional synthetic rubbers. The heat and chemical resistance factors, however, usually go far beyond the range of other rubbers.

The 60A durometer compound is specially formulated for use in peristaltic pumps. All VITUBE formulations are produced with 100% DuPont Performance Elastomers' Viton® fluoroelastomers (chemical name: fluorocarbon FKM) and are matte black in color. VITUBE contains no regrind material nor blends of other elastomers.

If accidental burning of VITUBE occurs, extreme caution should be taken due to Hydrogen Fluoride and other decomposition products. Avoid inhalation of vapors liberated at service temperatures above 392°F.

If your application calls for harder VITUBE, 90A durometer is available — call for details.

TOP OF PAGE


Request for QuoteVITUBE® - Type A

Product Number Note  ID  OD  Wall  Available Lengths  Shore Hardness(5) 
  2600192   .031 (1/32)  .094 (3/32)  .031 (1/32)  100, 50  75A 
  2600367 [B]  .031 (1/32)  .156 (5/32)  .063 (1/16)  50  75A 
  2600542   .063 (1/16)  .125 (1/8)  .031 (1/32)  100, 50  75A 
  2600717 [B]  .063 (1/16)  .188 (3/16)  .063 (1/16)  100, 50  75A 
  2601242   .125 (1/8)  .250 (1/4)  .063 (1/16)  100, 50  75A 
  2601942   .188 (3/16)  .313 (5/16)  .063 (1/16)  100, 50  75A 
  2602817   .250 (1/4)  .375 (3/8)  .063 (1/16)  50, 25  75A 
  2603167   .250 (1/4)  .500 (1/2)  .125 (1/8)  50  75A 
  2603692   .313 (5/16)  .438 (7/16)  .063 (1/16)  50, 25  75A 
  2603867   .375 (3/8)  .500 (1/2)  .063 (1/16)  50, 25  75A 
  2604042 [B]  .375 (3/8)  .563 (9/16)  .094 (3/32)  50, 25  75A 
  2604217 [B]  .375 (3/8)  .625 (5/8)  .125 (1/8)  25  75A 
  2604917 [B]  .500 (1/2)  .750 (3/4)  .125 (1/8)  25  75A 
  2605967   .750 (3/4)  1.000  .125 (1/8)  25  75A 
  2606142 [B]  .875 (7/8)  1.000  .063 (1/16)  25  75A 

[B] Limited stock item; lead times and minimums may apply --call for details.
Add length suffix to part number when ordering.
Example: 100 ft. of 1/32" I.D. x 3/32" O.D., 75A durometer tubing is part number 260 0192-100.
ID is the critical dimension for fittings application.

TOP OF PAGE


Request for QuoteVITUBE® - Type B

Product Number Note  ID  OD  Wall  Available Lengths  Shore Hardness(5) 
  2600185   .031 (1/32)  .094 (3/32)  .031 (1/32)  100, 50  60A 
  2600360 [B]  .031 (1/32)  .156 (5/32)  .063 (1/16)  100, 50  60A 
  2600535   .063 (1/16)  .125 (1/8)  .031 (1/32)  100, 50  60A 
  2600710   .063 (1/16)  .188 (3/16)  .063 (1/16)  100, 50  60A 
  2600885   .063 (1/16)  .250 (1/4)  .094 (3/32)  50  60A 
  2601235   .125 (1/8)  .250 (1/4)  .063 (1/16)  100, 50  60A 
  2601410   .125 (1/8)  .313 (5/16)  .094 (3/32)  100, 50  60A 
  2601935   .188 (3/16)  .313 (5/16)  .063 (1/16)  100, 50  60A 
  2602810   .250 (1/4)  .375 (3/8)  .063 (1/16)  50, 25  60A 
  2602985   .250 (1/4)  .438 (7/16)  .094 (3/32)  50, 25  60A 
  2603160   .250 (1/4)  .500 (1/2)  .125 (1/8)  50, 25  60A 
  2603685   .313 (5/16)  .438 (7/16)  .063 (1/16)  50, 25  60A 
  2603860   .375 (3/8)  .500 (1/2)  .063 (1/16)  50, 25  60A 
  2604035   .375 (3/8)  .563 (9/16)  .094 (3/32)  50, 25  60A 
  2604210   .375 (3/8)  .625 (5/8)  .125 (1/8)  25  60A 
  2604560   .500 (1/2)  .625 (5/8)  .063 (1/16)  25  60A 
  2604910   .500 (1/2)  .750 (3/4)  .125 (1/8)  25  60A 
  2605960   .750 (3/4)  1.000  .125 (1/8)  25  60A 
  2606135   .875 (7/8)  1.000  .063 (1/16)  25  60A 

[B] Limited stock item; lead times and minimums may apply --call for details.
Add length suffix to part number when ordering.
Example: 100 ft. of 1/32" I.D. x 3/32" O.D., 60A durometer tubing is part number 260 0185-100.
ID is the critical dimension for fittings application.
Download a printable PDF version of our Vitube literature.

Vitube_Viton_Tubing.pdf (136kb)

Requires Adobe® Reader® to view.

TOP OF PAGE

BACK TO TUBING & HOSE PAGE

| Home | Products | About Us | Reference Tools | Contact Us | Request for Quote |
| News | Tradeshow Schedule | Employment Opportunities | Community Service | Why NewAge? |


Legal Notices & Trademarks | Privacy Policy | Terms & Conditions of Sale 2000 - 2014 NewAge Industries

Find Us On Facebook

We are your "Fluid Transfer Specialists®"
Contact Us For Experienced Technical Support:
Phone: 800-506-3924 or 215-526-2300
Fax: 800-837-1856 or 215-526-2190
E-mail:
esales@newageindustries.com

NewAge® Industries, Inc., 145 James Way, Southampton, PA 18966-3817