Working pressure: Up to 230 psi (air and potable liquids)**
**These values are meant only as a guide to aid in design. Field testing should be performed to find the actual values for the application.
Use NEWLOC fittings with all types of semi-rigid to rigid plastic tubing including nylon and polyethylene. They can also be used in limited soft tubing sizes using tube supports - testing is recommended.Typical applications include systems for pneumatic control, food and beverage, chemicals, and potable water.
NEWLOC's ends are self-sealing -- do not use sealants such as PTFE tape.
If tube & fitting are disconnected, it may be necessary to re-cut the end of the tubing to ensure perfect sealing when reattached.
All items sold in increments of 10 pieces.
^NSF listed as trade designation "JG".
Newloc fittings are also available constructed of brass material.
Newloc Acetal Fittings come in a variety of configurations. Select a category below to go to a complete listing.
How to Install Newloc® Fittings
| Home |
About Us |
Reference Tools |
Contact Us |
Request for Quote |
We are your "Fluid Transfer Specialists®"
Contact Us For Experienced Technical Support:
Phone: 800-506-3924 or 215-526-2300
Fax: 800-837-1856 or 215-526-2190
NewAge® Industries, Inc., 145 James Way, Southampton, PA 18966-3817